solution-advance-emc.png

Ahead of The Curve?

Tags

see all
Advanced EMC Technologies Request For Quote

Advanced EMC Technologies Blog

Guidelines for Machining PEEK, PAI and Other Advanced Polymers

Posted On November 18, 2016

 
Annealing

Machining and finishing of high temperature polymer materials can release residual stress. It is recommended that a second annealing is performed on the semi-finished stock prior to the machining process. Annealing can limit dimensional changes, remove stress, and increase levels of crystallininty.

Continue reading →

Posted in: Annealing Plastics, Machined Plastics

3 Key Challenges in Machining Plastics

Posted On November 16, 2016


The basic principles behind machining engineering plastics are the same as those behind machining metals, but there are some key characteristics of plastics that make machining them to tolerance an interesting challenge.  

Continue reading →

Posted in: Machined Plastics

Posts by Topic

see all
polymer_berings_bushings.jpg
fluoroseal_ptfe_seals.jpg
fluoroseal_ptfe_rotary_lip_seal.jpg
PTFE_bellows_diaphragms.jpg